What are the disassembly methods for roller sliding bearings?

For people who often use bearing products, it is necessary to understand some disassembly methods of sliding bearings, which can help improve production efficiency. The following sliding bearing manufacturers will introduce to you.

Sliding bearing products are very common parts. The normal operation of composite bearings such as automobiles and machine tools cannot be separated from the use of various types of bearings, whether it is needle roller bearings, or products such as sliding bearings.

　　 The equipment is operating normally after installation. If there is a problem, it is important to disassemble it for inspection.

　　 Roller sliding bearings are ordinary used in the automotive boundary. They are equipment that must not be used for the operation of the car, but there are certain difficulties in disassembly and assembly.

　　 Therefore, it is very important to be in charge of the correct disassembly method. There are several disassembly methods for composite roller sliding bearings:

　　 One, the pull-out method, that is, the needle roller bearing is pulled out through a device, so it is also possible;

　　Second, the push method is also a good method, this method is difficult to control, and there are more concerns;

　　 Third, the percussion method, that is, knock it down with a hammer, this method is directly compared, but simply damages the equipment after striking;

　　 Fourth, the thermal dismantling method, this method is comparatively applicable, that is, it is heated to a certain temperature to expand the sliding bearing ring, so that it can be easily removed.

　　Okay, the above is all about the disassembly method of sliding bearing, I hope to help everyone.

/